Differences

This shows you the differences between two versions of the page.

--- motor:stepper [2018/05/31 01:54] – mcmaster
+++ motor:stepper [2018/12/26 15:20] (current) – removed mcmaster
@@ Line 1: / Line 1: @@
-Place to aggregate motor information, mostly as it relates to microscopes
--05-28: creating page to aggregate industry pinout information and mcmaster recommendations.
-====== Connector ======
-List of common connectors
-===== DB25 (step/direction) =====
-{{:compumotor:oem650:oem650_db25.png?600|}}
-Above: Compumotor OEM650 pinout
-{{:pmc:vs:pmc_vs_db25.png?300|}}
-Above: PMC VS Drive pinout
-This seems to have been a de facto standard for some years. I've observed it on Compumotor, PMC, and other drivers.
-mcmaster: IMHO this is too bulky to use in modern applications, although I do have several legacy drivers using it
-===== IDC 5x2 (step/direction) =====
-{{:ims:mdm:ims_idc.png?500|}}
-Used on some MDrive17 motors
-mcmaster: of particular interest to me since I try to use these motors by default.
-===== M12 connector (power + CAN) =====
-M12/M23 seems to be common on modern stepper motors. The MDrive manual for example cites it was done to reach IP65 enclosure rating:
-<code>
-The MDrive17Plus2-65 Motion Control adds protection against the ingress of fluids and dust to
-the MDrive17Plus2 by changing the motor-drive enclosure to meet IP65 specifications. With this
-change the connector configuration changes to industry standard M12/M23 circular connectors.
-</code>
-http://www.te.com/content/dam/te-com/documents/channel/global/m8m12-connectorsystem-presentation.pdf
-  * A-coding: actuator-sensor plug connections for DeviceNet, IO link and Profibus
-    * DeviceNet is used my mcmaster MFCs
-  * B-coding: Fieldbus connections for Profibus and Interbus
-  * D-coding: Industrial Ethernet, Profinet, Ethernet/IP and EtherCat
-  * S-coding: Motor, Frequency-convertors, motor operated switches, PSUs for Power, 620V, 12A
-  * T-coding: Fieldbus comp, passive distribution boxes, motors, PSUs for Power, 63V, 12A
-===== Combicon 5 pin (bipolar motor) =====
-{{:pmc:vs:pmc_vs_motor.png?200|}}
-Above: PMC motor
-===== Gecko DB9 (bipolar motor) =====
-{{:gecko:g540:g540_x.jpg?200|}}
-===== Gecko DB25 (multi-axis indexer) =====
-{{:gecko:g540:g540_db25.png?300|}}
-Above: G540 indexer connection
-The G320X servo driver uses post mounted Phoenix contact type connectors.
-===== Sherline (unipolar motor) =====
-{{:sherline:motor_conn:sherline_motor.jpg|}}